Collection of Terminator dongle tutorials and guides.

Bruevich · Moderator Joined: 12 Feb 2006 Posts: 232

This thread will dedicated to flashing and unlocking using Terminator Dongle and Div software. I will put out some tutorials and guides. Authors will be mentioned where applicable.
Post your questions if you don't understand something or need some additional files.

T610 Sony Ericsson T610 Unlocking Flashing tutorial

Bruevich · Moderator Joined: 12 Feb 2006 Posts: 232

AP1 = English, Indonesian, Malaysian
AP2 = English, Tagalong, Vietnamese, Thai
AP3 = English, Simp Chinese

China1 = English, Simp Chinese, CMCC
China2 = English, Simp Chinese
HongKong = English, Hong Kong Chinese
Taiwan = English, Taiwan Chinese
T610

EMEA1 = English, Estonian, Latvian, Lithuanian, Russian
EMEA2 = English, Czech, Croatian, Serbian, Slovak, Slovenian
EMEA3 = English, Greek, Turkish
EMEA4 = English, Bulgarian, Hungarian, Romanian
EMEA5 = English, French, Arabic, Persian, Hebrew, Russian
EMEA6 = English, French, Arabic, Persian, Russian

EU1 = English, French, Portuguese, Spanish
EU2 = English, French, German
EU3 = English, French, Danish, Dutch
EU4 = English, Swedish, Norwegian, Finnish
EU5 = English, French, German, Italian
EU6 = English, Dutch, Greek, Polish, Spanish, Swedish (Vodafone)
EU7 = English, French, German, Italian, Arabic, Hungarian (Vodafone)

US1 = US English, Canadian French, Latin Spanish
US2 = US English, Latin Spanish, Brazilian Portuguese
US3 = US English, Latin Spanish (T-Mobile)

Bruevich · Moderator Joined: 12 Feb 2006 Posts: 232

READ EVERYTHING BELOW BEFORE STARTING TO AVOID ANY PROBLEMS

Note: If you have a phone that made by "Ericsson" and it says T68, this is a T68m model

Note: There are a few T68i / T68m out there that have different PCB revisions that cause them to lose there bluetooth connectivity, there is no current end user fix with DIV for this problem

Preparing The Phone:
1. Fully Charge the Battery
2. Remove SIM Card

Before we start to avoid any error messages do the following:

1. Restart You Computer (Wait Till It Loads Into Windows)
2. Plug In Dongle and USB Cable
3. Make Sure "USER PORT" is NOT Running
4. Start DIV 8.4 - "Cracked DIV 8.4 updated (Z600)"

Connecting The Phone:

1. Plug In Phone With No Battery
2. Attach Battery

Disconnecting The Phone:

1. Remove Battery
2. Unplug Cable

Upgrading T68i to R8A015

Connect The Phone
Select "T68"
Select "Flash AVR CPU With:" Select this file "T68i_EU2_R8A015.SBN"
Select "Flash ARM CPU With:" Select this file "T68i_Modem_R8A015.arm"
Click "Make Selected Job"
Disconnect Phone

To convert T68m - T68i

Select "T68"
Select "Write GDFS file with:" Select this file "T68m_to_T68i_Version2.gdf"
Select "Flash AVR CPU With:" Select this file "T68i_EU2_R8A015.SBN" *
Select "Flash ARM CPU With:" Select this file "T68i_Modem_R8A015.arm"
Click "Make Selected Job"
Disconnect Phone

Now push and hold the "No" key for 10-15 seconds and the wait up to a few minutes for the phone to initialize the new firmware

To Unlock:

Connect The Phone
Select T68
Select "Rebuild SP Using OPT IMEI"**
Click "Make Selected Job"
Disconnect Phone

* Choose a language pack of your choice. Remember to use the same sw versions for both AVR and ARM.

** There are other ways to unlock this phone, you can use "Read Codes", "Clear SP Locks"

Note: If you get "No Access" or "No Network" then "Rebuild SP Using OPT IMEI"

If there are any other problems with network then verify IMEI number with the sticker in the back of the phone
- To verify IMEI, in the Home Screen of the phone type in *#06#, Dont worry about the last 2 numbers

Note: there most likely will NOT be any new firmware for the T68 after R8A015

Files:

AVR:
T68i_EU2_R8A015 Full flash
ARM:
T68i_Modem_R8A015
GDFS:
T68m to T68i GDFS File (Version 2)
DIV:
Cracked DIV 8.4 updated (Z600)

Bruevich · Moderator Joined: 12 Feb 2006 Posts: 232

1) DIV 3.1 900/1800/1900
2) AVR: R4C003 T630
3) ARM: R4C003 T630
4) Don't need to touch the gdfs if you don't want to.

Bruevich · Moderator Joined: 12 Feb 2006 Posts: 232

Use T230 option to unlock T290.
1.connect battery
2.insert cable
3.read codes

Bruevich · Moderator Joined: 12 Feb 2006 Posts: 232

you can unlock Sony Ericsson T61z and T62u cellphones
with divlpt3.1 by selecting T300 and select READ ALL CODES

Bruevich · Moderator Joined: 12 Feb 2006 Posts: 232

How to upgrade T300 to T310

1. Write (upload) Main CPU (AVR) with desired flash (language) from T310
2. Write (upload) GDFS file "T300_to_T310.GDF"
3. Disconnect phone from cable